Guides
Filling, priming and cleaning the oil sprayer
These steps come from the instructions for use of the WALLINBERG® oil sprayer. They apply to first use and to regular care.
Before first use
- Fill the bottle with warm water and a drop of mild detergent.
- Spray until the soapy water comes out, then 6 to 10 more strokes.
- Rinse with clean water and spray clear at least 10 times.
- Let it dry completely.
Filling and priming
- Fill slowly using the included funnel and avoid air bubbles.
- Screw the head on firmly.
- Pump 5 to 10 times until a fine, even mist forms.
Cleaning and care
- Empty after use and repeat the cleaning steps for first use.
- If clogged, flush with diluted vinegar and then with water.
- Not dishwasher-safe: hand-wash only.
- Do not place in the freezer, microwave or dishwasher.
If no fine mist forms
- Press firmly and swiftly. A gentle press gives a stream.
- Pump 5 to 10 times after filling.
- Keep upright, tilt no more than 45°.
- Very viscous or old oils are not suitable.
Storage
- Store at 10 to 30 °C.
- Keep out of reach of children.
- The sprayer is not a pressurised container.
More guides
WALLINBERG® oil sprayer
In borosilicate glass and stainless steel SS304, 100 ml. Available on Amazon.
Order on Amazon (Opens Amazon in a new tab)